 |
You have an 86 4wd truck z24 engine It got flooded with water you replaced the computer and cleaned and checked all grounds but the injectors do not pulse with no noid light response what could it be?In: Asian Cars |
[Edit] |
Answer
You have got some major troubleshooting ahead. Start with the computer relay and fuseable link, make sure there is power to the cmputer and then power out to the injector control. You will need a detailed wiring schematic. Water will short any powered circuit, and relays if not water tight will fail. You need to trace and verify your connections from the battery all the way to the injectors themselves.
First answer by Ganderton. Last edit by Ganderton. Contributor trust: 1880 [recommend contributor]. Question popularity: 34 [recommend question]
Answers.com > Wiki Answers > Categories > Cars and Vehicles > Asian Cars > You have an 86 4wd truck z24 engine It got flooded with water you replaced the computer and cleaned and checked all grounds but the injectors do not pulse with no noid light response what could it be?
Our contributors said this page should be displayed for the questions below. (Where do these come from ) |
| If any of these are not a genuine rephrasing of the question, please help out and edit these alternates. |
