 |
Why does a 1993 Infinity J30 shake after replacing all the plugs?In: Infiniti J30 [Recategorize] |
[Edit] |
[Edit] 
J30's don't have a distributor. Each cylinder has its own ignition coil controlled from the engine computer.
It sounds like it is misfiring as one of the cylinders is now no longer reaching ignition.
I'd say double check the connections. Push on each plug to make sure they are completely engaged. I am talking about the power source to the coil.
Hopefully, you didn't overtorque the plugs and strip the cylinder head sparkplug sockets. Only about 15-18 ft./lbs. are needed.
It sounds like it is misfiring as one of the cylinders is now no longer reaching ignition.
I'd say double check the connections. Push on each plug to make sure they are completely engaged. I am talking about the power source to the coil.
Hopefully, you didn't overtorque the plugs and strip the cylinder head sparkplug sockets. Only about 15-18 ft./lbs. are needed.
Answer
It is possible that the wires from the distributor were not replaced to their corresponding spark plugs.
First answer by ID1148767259. Last edit by Chimchim68. Contributor trust: 1 [recommend contributor]. Question popularity: 27 [recommend question]
Answers.com > Wiki Answers > Categories > Cars and Vehicles > Asian Cars > Infiniti > Infiniti J30 > Why does a 1993 Infinity J30 shake after replacing all the plugs?
Our contributors said this page should be displayed for the questions below. (Where do these come from ) |
| If any of these are not a genuine rephrasing of the question, please help out and edit these alternates. |
Will a camshaft scincer make a 1993 j30 infinity not start? You have 1993 j30 infinity the car begins to rumble miss fire? Why does a 1993 infinity j30 shakes after replacing all the plugs.?
