Home
 |
What is the procedure to remove the drivers interior door panel in a 1996 Ford Crown Victoria? |
[Edit] |
See deatiled instrucitons and pictures here...
http://www.autoclinix.com/Mercury/Front%20Speakers2.htm
Answer
there are a few screws in the door skin remove all that you see, to pull the remote mirror unscrew the round ring first then lift the power door lock up. there are 2 screws that hold the switch in place to the wiring harness you may need to take off if you cant slip it thru the panel. with a butter knife or a large screw driver pull the retainers that hold the door skin to the door be sure all screws are out of the door if it wont budge look for more screws some may be inside the panel where you took off the pwr.window switch lift the door skin up and it should be easy to put back if you dont have any bad retainers when your done!:)
First answer by ID2560844931. Last edit by Sheebeehuh. Contributor trust: 73 [recommend contributor]. Question popularity: 61 [recommend question]
Answers.com > Wiki Answers > Categories > Cars and Vehicles > American Cars > Ford > Ford Crown Victoria > What is the procedure to remove the drivers interior door panel in a 1996 Ford Crown Victoria?
Our contributors said this page should be displayed for the questions below. (Where do these come from ) |
| If any of these are not a genuine rephrasing of the question, please help out and edit these alternates. |
