Home
 |
What is the location of and how do you replace the O-ring on the injectors in a 1991 Jeep?In: Jeep [Edit categories] |
[Edit] |
[Edit] 
Answer
the First and most important step is there is a shcrader valve on the fuel rail (looks like a valve stem for a tire, put a rag around this and push on the core like you are letting the air out of a tire. This relieves the fuel pressure from the system so it doesnt spray all over you. After removing the fuel rail from the top of the injectors and the electrical plugs from the sides you can carefully extract each injector from it's hole.. the key is lubricate the O-rings before reinstalling them and second I heartily recommend replacing all the O-rings at once..they are cheap enough and if one is leaking the others will be sooner or later (sooner if you bump them while changing the one next to it.
Under the injectors where they screw into the heads...
First answer by ID2671079055. Last edit by TheGoose. Contributor trust: 51 [recommend contributor]. Question popularity: 74 [recommend question]
|
Research your answer: |
Can you answer other
questions about Jeeps?
- What are the weights of Turbo 350 box and a standard Chevy 350 V8 with cast iron heads Also for comparison the weight of a Ford 300 CID straight six?
- What is the best kind of jeep to buy?
- Where is the egr on a 1994 jeep wrangler 2.5?
- How do find the cable for the speed on powertrain controlll module?
Answers.com > Wiki Answers > Categories > Cars and Vehicles > American Cars > Jeep > What is the location of and how do you replace the O-ring on the injectors in a 1991 Jeep?
Our contributors said this page should be displayed for the questions below. (Where do these come from ) |
| If any of these are not a genuine rephrasing of the question, please help out and edit these alternates. |
How do you replace injectors 1996 jeep? How to Replacing o ring on the injectors 91 Jeep where are they?
