![]() |
How do you remove the stereo from a Ford Taurus dash?In: Ford Taurus [Recategorize] |
[Edit] |
Answer
you have to buy a special tool from best buy its about $10.00. or you can take it to the dealership and theyll charge ya 40.00. you do the math
Answer
Don't want to spend the money? You can insert 4 small slender rods in the 4 holes on the left and right side of the radio (small allen wrenches or very long nails, or similar). insert until you feel some tension, then apply slight pressure towards the outside of the radio while pulling the radio out. There are clips that you need to press in towards the radio to release it. Sometimes, you can do one side at a time.
-donville
Answer Clarified
The answer that donville provided is excellent, however it doesn't take you through it step by step.
You can use two long screwdrivers and put them into the side closest to the cassette dock. Then you can push away from the stereo while grabbing the front. This will kick out the one side of the device. Do the same on the other two holes, but have a firm grip on the front of the stereo. Otherwise the side that you have popped out will pop back in. From here you can pull the stereo out and tilt it up so the hook above the stereo will clear the top of the main housing.
First answer by ID0410433941. Last edit by Maschine047. Contributor trust: 0 [recommend contributor]. Question popularity: 99 [recommend question]





