![]() |
How do you remove the inside door panel of a 1994 Toyota Camry to fix a window that will not go up?In: Toyota Camry [Recategorize] |
[Edit] |
Answer
Hey Tracy==It realy isn't as easy as it sounds. First remov e all of the screws yu can find. Then there are retainers all of the way around the panel. Be careful as there are very sharp edges inside the door. The motor or wiring is probably at fauly and you have to know what you are doing to get it out. GoodluckJoe
Answer
this answer is incomplete... the inside doorhandle trim is difficult to remove and there are no visible screws on or around the trim. that's what i was hoping to learn about. any suggestions?
Answer
Try looking for little circles that are pretty much flush in the surface of the panel...those are screw-covers.
From another question and answer on this site, read an excellent answer at: http://autorepair.about.com/od/otherodddiyjobs/l/aa092504a.htm But my 1994 model was just slightly different: there is no light, but there is a screw under a small plastic cover below the handle. Also, it helps to pop off the black triangular plastic cover at the lower front corner of the window.
Answer
I ended up breaking mine off and it looks lke you need to pull the side furthest from the engine out first so that it slides out at an angle. There is a hook on the side near the engine that goes in at an angle so it has to come out at an angle.
Answer
Added link below to the same question about the 91 Camry. Chances are the trick with the inside door handle trim is the same.
First answer by ID0000000000. Last edit by Pajamian. Contributor trust: 0 [recommend contributor]. Question popularity: 108 [recommend question]





