How do you install a fuel pump on a 1998 acura 3 2 TL?

Answer

I am really not sure but I thought I had to this evening. I purchased a new fuel pump from advanced auto parts for $133.00 and the screen for an additional 18.00. I knew the fuel filter was completely clogged so I changed it, still nothing. The main relay assembly which is under the driver's side dash, left side wall, turned out to be the problem. Apparently as the fuel filter clogs the pump runs harder to keep the required fuel pressure. This also requires more current, without blowing the 10 amp fuse, it heats up the relay board, there was a cold solder joint on the number 2 relay which drives the pump. The overall repair turned out to be 18.50 for the filter, 2 hours of highly evolved 4 letter words, and an hour of reassembly of the undercarriage still not knowing how to drop the fuel tank, I summise there are hidden bolts that hold the fuel tank but I do not have a clue where they are located. I'm guessing somewhere between the front and back bumpers. Under the back seat, tried that, in the trunk - tried that. Maybe once I dropped the tank cover and the two straps I could have used a larger hammer. Or maybe a large Sumo wrestler to yank it down????? Good luck.

First answer by ID1159038640. Last edit by ID1159038640. Question popularity: 41 [recommend question]