How do you change an alternator in your 1995 gs300 lexus?

2JZ-GE Engine

1. Disconnect the negative battery cable. Wait at least 90 seconds before performing any other work.
2. Remove the engine undercover.
3. Turn the drive belt tensioner clockwise and remove the drive belt from the engine.
4. Disconnect the generator electrical connector.
5. Remove the rubber cap and nut and then disconnect the alternator wire.
6. Disconnect the alternator wire clamp from the wire clip on the alternator.
7. Disconnect the A/T coolant hoses and bracket from the alternator by removing the bolt and pipe clamp.
8. Remove the alternator bolt, nut, pipe bracket and then remove the alternator from the engine.

1. Install the alternator and pipe bracket. Torque the bolt and nut to 27 ft. lbs. (37 Nm).
2. Install the A/T oil cooler pipes to the alternator and install the bolt and pipe clamp.
3. Connect the alternator wire clamp to the wire clip on the alternator.
4. Connect the electrical wire to the alternator and install the nut.
5. Install the alternator electrical connector.
6. Install the drive belt.
7. Install the lower engine cover.
8. Connect the negative battery cable.
9. Start the engine and check the charging system for proper operation

First answer by ID1200521300. Last edit by ID1200521300. Question popularity: 21 [recommend question]