 |
How do you adjust the alternator belt on a Daewoo Lanos?In: Daewoo Lanos |
[Edit] |
Answer
You cannot adjust the belt tension on the alternator, it is automatically adjusted by the automatic tensioner located by the A/C compressor, if it's squealing check the tensioner for sticking, the belt for wear and the pullys for bearing noise.
Answer
I don't know about that, like most all cars, you can tighten/loosen the belt by moving the alternator back and forth.
Answer
You can adjust the serpentine belt in about 5 mins. get a socket wrench preferably one with a swivel, and losen the top bolt of the alternator located on the back-top of the alternator, dont loosen too much, hard to tighten back up when TB is in the way. take a large prybar, find a solid point to put base of prybar up against, push top of prybar towards rear of vehicle till belt is at desired tension"may take a try or two" hold prybar in place till you can get bolt on alternator tightened. should be all set.
Robert Cravens_Robert@yahoo.com
First answer by Cheezevomit. Last edit by ID0081802906. Question popularity: 45 [recommend question]
Answers.com > Wiki Answers > Categories > Cars and Vehicles > Asian Cars > Daewoo > Daewoo Lanos > How do you adjust the alternator belt on a Daewoo Lanos?
Our contributors said this page should be displayed for the questions below. (Where do these come from ) |
| If any of these are not a genuine rephrasing of the question, please help out and edit these alternates. |
