Home
 |
1997 JEEP TJ Wrangler overheated and motor quit running. Now it will not start. I have gas and spark. I have replaced the crank sensor and it did not help. I was getting errors 55 65 11 and 12?In: Jeep [Edit categories] |
[Edit] |
There are 4 different readings for 11 12 without the generic scan tool code it will be harder to determine. For 12 battery power to pcm was disconnected. for 11code p0320 no crank reference signal detected during engine cranking.for 11 codep1391 intermittent loss of either camshaft or crankshaft position sensor. for11 codep1398 ckp [crank shaft position]sensor target windows have too much variation. sorry my reference manual does not show 55 or 65 hope i helped
First answer by ID3282845299. Last edit by ID3512132113. Question popularity: 77 [recommend question]
Answers.com > Wiki Answers > Categories > Cars and Vehicles > American Cars > Jeep > 1997 JEEP TJ Wrangler overheated and motor quit running. Now it will not start. I have gas and spark. I have replaced the crank sensor and it did not help. I was getting errors 55 65 11 and 12?
Our contributors said this page should be displayed for the questions below. (Where do these come from ) |
| If any of these are not a genuine rephrasing of the question, please help out and edit these alternates. |
